P-TECH IT
All P-TECH sites online· 9:16 PM Eastern, open the status page

Module 5: Firmware

Week of Thu, Sep 3 · module closes Tue, Sep 8

Take Meerk's quiz for Module 5

NotesFirmwareFlashcards5 termsExercises1 tasks

This module's items

Exact due times are in Canvas. Late work is not accepted. ACADEMIC INTEGRITY: your own words and your own work only. Plagiarism, or AI-written work turned in as yours, breaks PGCC's Code of Academic Integrity: a first violation earns a zero, and a second is an F for the course.

Know these cold

  1. UEFI replaces legacy BIOS — it supports GPT disks, drives over 2 TB, and Secure Boot.
  2. POST (Power-On Self-Test) runs at every boot to verify CPU, RAM, and storage before the OS loads.
  3. The CMOS battery (CR2032) keeps BIOS settings and the real-time clock alive without AC power.
  4. Secure Boot blocks unsigned bootloaders — required for Windows 11.
  5. Boot order: set in UEFI — specifies which device (NVMe, USB, optical) is tried first.
  6. Never power off during a BIOS flash — partial writes corrupt firmware and can brick the board.

Meerk's quiz — open the Module 5 gate

10 questions, no time limit. One counted try: 85% opens the gate. Miss it and Meerk's Study Path opens: it teaches every miss back to you, then a mastery check — and it cannot finish before 25 minutes of real study. Then your second try opens. Work alone; the point is to know it, not to have seen it.

Stuck?

Raise your hand. Mr. James gets a message right away and can help you remotely. Nothing else is stored — just your last name, grade, and where you're stuck.

My Progress

Dinner Table Question

Ask at home: After a board swap, the clock resets to 2000 and BIOS settings are lost every power cycle. Which component is failing?

En español: Tras cambiar la tarjeta madre, el reloj vuelve al 2000 y la BIOS se reinicia en cada ciclo. Que componente falla?

← Module 4Module 6 →

↑ Back to top